BFT THALIA / THALIA L gate — open it from your phone, remotes stay
No need to replace the drive or dig for the remote at the bottom of a bag. A small relay (Remootio) connects to the BFT THALIA / THALIA L board where the button already is — and the gate opens from the app, by voice, or by itself when you arrive.
★
Three reasons families choose this
No remotes. The phone is always with you; the remote stays in the car as a backup.
Guests without hassle. Send a key for an evening or a week — and revoke it when no longer needed.
Peace of mind. A notification if the gate is left open; a history of who opened and when.
☆
What the family gets
The relay sits next to the button, not instead of it. Button, remotes, photocells — all as before.
!
No voltage may reach these terminals ((1)(2)) — only a «dry» contact. That is why power relays are unsuitable and the connection is best left to an installer.
The gate opens from the app or by voice (Siri, Google, Alexa) — the relay clicks like a button.
The app shows whether the gate is open or closed — sensor included.
Keys for family, grandparents, guests and the courier — with time limits and revocation.
The gate opens by itself when you arrive (geofence) and closes on a schedule.
♥
What to get
Remootio 3 · (1)(2) → terminals 61 (IC1) + 60 (COM) — neighbours in the 60·61·62 command blockOXT T210G (Tuya) · (1)(2) → terminals 61 (IC1) + 60 (COM) — neighbours in the 60·61·62 command block
For the family
Remootio 3
Made just for gates: sensor included, powered from the gate board, works without internet.
Keys for family and guests
Opens by itself when you arrive
Shows whether the gate is closed
HomeKit / Google / Alexa
If you already have a smart home
Shelly / dry relay
A cheaper option for those who already have Home Assistant or the Tuya app.
The relay «presses» the same button — just from your phone
The BFT THALIA / THALIA L board has a place where the button is connected. The relay connects right there and «presses» the button from the app the same way you do. Photocells and remotes stay — nothing is disconnected.
Two terminals on the board — (1) and (2) in the drawing: (1)(2). A short click = one command (open → stop → close). The installer checks the labels on your board.
BFT THALIA / THALIA L — real board layout, redrawn from the official manual · (1) 61 IC1 + (2) 60 COM · source: BFT THALIA D814123 (terminal table) + ismartgate drawing · SVG ↗
i
⚠️ There is no printed START on this board — the command is input IC1 (terminal 61) with COM (60) as the common. IC1 defaults to Start E (toggle: open → stop → close), nothing to reconfigure. Do NOT bridge to 70/71 (STOP, NC) and do not remove the factory jumpers of the 70…75 block — the drive will stop moving. Full terminal row: 10 11 14 15 · 20 21 · 26 27 · 40–45 · 50 51 52 · 60 61 62 · 70–75. The extended THALIA P adds 63 64 65 (IC3/IC4) and SAFE up to 85 — commands stay on 60/61/62.
·
Separate «open» and «close»
There are no dedicated «always open / always close» terminals, but the inputs are configurable: in the board menu (logic Ic 1 / Ic 2) input 61 can be set to OPEN and 62 to CLOSE. By default 62 = PED (pedestrian — one leaf partly). A second relay channel on 62+60 works right away as a pedestrian button.
·
More buttons in the app
One multi-channel smart relay gives separate buttons in the app. Ch1 → 61+60 and Ch2 → 62+60 (both share common 60). By default that is «full cycle» + «pedestrian»; set Ic 1 = OPEN and Ic 2 = CLOSE in the board menu and you get true «always open» and «always close» (open on arrival, close on schedule). Input 71 STOP is normally closed — it is never wired to the relay.
Multi-channel dry relay: Ch1 → 61 (IC1) + 60, Ch2 → 62 (IC2) + 60 · input roles set in the Ic 1 / Ic 2 menu
·
How to power the relay — 24 V AC is not 24 V DC
⚡
Many boards (BFT 50/51, CAME 10/11, Nice) give 24 V AC on the accessory terminals. A Wi-Fi relay fed from AC dies at once — measure with a multimeter first, or read the manual.
Only use board power if the manual states DC and the current budget (Alutech: ~120 mA) covers the relay; otherwise an AC/DC adapter or a 230 V supply on the mains side (electrician).
Remootio 3 accepts 12–24 V AC/DC and USB — the safest option. Shelly Plus 1: DC 12–24 V or 230 V, never AC 24 V.
Never take relay power from the command terminals themselves.
FAQ
Do I need to replace the gate motor?
No. The BFT THALIA / THALIA L stays, the relay connects where the button is. Remotes work as before.
Can I give a key to my parents or the nanny?
Yes — in the Remootio app you send a key for a specific time or permanently and revoke it at any moment.
What if there is no internet?
Remootio works locally over Bluetooth and Wi-Fi. The remote and the button always work.
Can I see whether the gate is closed?
Yes — the sensor on the gate shows the real position in the app and can send a notification if the gate was left open.
Can I connect it myself?
The relay part is low-voltage, but a gate is a machine: the 230 V side and the check are best left to an installer. We connect and test.
!
A gate is a heavy machine. Leave the 230 V side and start-up to an electrician or installer; the relay is connected only with the drive switched off. This page explains how it works — it does not teach you to do it yourself.
§
About safety
§
When a gate is opened remotely, photocells and force limiting (EN 12453) matter even more — they must work. Factory safety is never disabled. Exact terminals for your board version — in the official BFT THALIA / THALIA L manual (BFT THALIA D814123 (terminal table) + ismartgate drawing).
Want your BFT THALIA / THALIA L gate on your phone?
Remootio is in the catalogue with the sensor included. If you like, we connect it and show how to give keys to the family.
SmartBee · Smart home · Gate from your phone · Gate automation for family homes — simplyParts of this content may be AI-assisted. Terminal data comes from the official drive manual.