Hörmann SupraMatic 4 / ProMatic 4 (Series 4) — operator-head external button terminals 23 5 21 20 gate — open it from your phone, remotes stay
No need to replace the drive or dig for the remote at the bottom of a bag. A small relay (Remootio) connects to the Hörmann SupraMatic 4 / ProMatic 4 (Series 4) — operator-head external button terminals 23 5 21 20 board where the button already is — and the gate opens from the app, by voice, or by itself when you arrive.
★
Three reasons families choose this
No remotes. The phone is always with you; the remote stays in the car as a backup.
Guests without hassle. Send a key for an evening or a week — and revoke it when no longer needed.
Peace of mind. A notification if the gate is left open; a history of who opened and when.
☆
What the family gets
The relay sits next to the button, not instead of it. Button, remotes, photocells — all as before.
!
No voltage may reach these terminals ((1)(2)) — only a «dry» contact. That is why power relays are unsuitable and the connection is best left to an installer.
The gate opens from the app or by voice (Siri, Google, Alexa) — the relay clicks like a button.
The app shows whether the gate is open or closed — sensor included.
Keys for family, grandparents, guests and the courier — with time limits and revocation.
The gate opens by itself when you arrive (geofence) and closes on a schedule.
♥
What to get
Remootio 3 · (1)(2) → 21 (impulse) + 20 (0 V common) on the head-unit screw block 23 5 21 20OXT T210G (Tuya) · (1)(2) → 21 (impulse) + 20 (0 V common) on the head-unit screw block 23 5 21 20
For the family
Remootio 3
Made just for gates: sensor included, powered from the gate board, works without internet.
Keys for family and guests
Opens by itself when you arrive
Shows whether the gate is closed
HomeKit / Google / Alexa
If you already have a smart home
Shelly / dry relay
A cheaper option for those who already have Home Assistant or the Tuya app.
The relay «presses» the same button — just from your phone
The Hörmann SupraMatic 4 / ProMatic 4 (Series 4) — operator-head external button terminals 23 5 21 20 board has a place where the button is connected. The relay connects right there and «presses» the button from the app the same way you do. Photocells and remotes stay — nothing is disconnected.
Two terminals on the board — (1) and (2) in the drawing: (1)(2). A short click = one command (open → stop → close). The installer checks the labels on your board.
Series 4 heads (cover removed) have a vertical 4-pole screw block printed 23 / 5 / 21 / 20 next to the BUS and SE2 sockets: 23 = channel 2 (partial opening), 5 = +24 V DC, 21 = channel 1 impulse, 20 = 0 V. Relay across 21 + 20, dry contact only, buttons in parallel. The push-in clamp pair above the block (SE1) is the photocell input — do not touch.
·
Separate «open» and «close»
This board has one toggle button — like a remote. In the app it looks like one «gate» button.
·
How to power the relay — 24 V AC is not 24 V DC
⚡
Many boards (BFT 50/51, CAME 10/11, Nice) give 24 V AC on the accessory terminals. A Wi-Fi relay fed from AC dies at once — measure with a multimeter first, or read the manual.
Only use board power if the manual states DC and the current budget (Alutech: ~120 mA) covers the relay; otherwise an AC/DC adapter or a 230 V supply on the mains side (electrician).
Remootio 3 accepts 12–24 V AC/DC and USB — the safest option. Shelly Plus 1: DC 12–24 V or 230 V, never AC 24 V.
Never take relay power from the command terminals themselves.
FAQ
Do I need to replace the gate motor?
No. The Hörmann SupraMatic 4 / ProMatic 4 (Series 4) — operator-head external button terminals 23 5 21 20 stays, the relay connects where the button is. Remotes work as before.
Can I give a key to my parents or the nanny?
Yes — in the Remootio app you send a key for a specific time or permanently and revoke it at any moment.
What if there is no internet?
Remootio works locally over Bluetooth and Wi-Fi. The remote and the button always work.
Can I see whether the gate is closed?
Yes — the sensor on the gate shows the real position in the app and can send a notification if the gate was left open.
Can I connect it myself?
The relay part is low-voltage, but a gate is a machine: the 230 V side and the check are best left to an installer. We connect and test.
!
A gate is a heavy machine. Leave the 230 V side and start-up to an electrician or installer; the relay is connected only with the drive switched off. This page explains how it works — it does not teach you to do it yourself.
SmartBee · Smart home · Gate from your phone · Gate automation for family homes — simplyParts of this content may be AI-assisted. Terminal data comes from the official drive manual.