Key Automation CT102 (230 V, 1 motor) gate — open it from your phone, remotes stay
No need to replace the drive or dig for the remote at the bottom of a bag. A small relay (Remootio) connects to the Key Automation CT102 (230 V, 1 motor) board where the button already is — and the gate opens from the app, by voice, or by itself when you arrive.
★
Three reasons families choose this
No remotes. The phone is always with you; the remote stays in the car as a backup.
Guests without hassle. Send a key for an evening or a week — and revoke it when no longer needed.
Peace of mind. A notification if the gate is left open; a history of who opened and when.
☆
What the family gets
The relay sits next to the button, not instead of it. Button, remotes, photocells — all as before.
!
No voltage may reach these terminals ((1)(2)) — only a «dry» contact. That is why power relays are unsuitable and the connection is best left to an installer.
The gate opens from the app or by voice (Siri, Google, Alexa) — the relay clicks like a button.
The app shows whether the gate is open or closed — sensor included.
Keys for family, grandparents, guests and the courier — with time limits and revocation.
The gate opens by itself when you arrive (geofence) and closes on a schedule.
♥
What to get
Remootio 3 · (1)(2) → SS + COMOXT T210G (Tuya) · (1)(2) → SS + COM
For the family
Remootio 3
Made just for gates: sensor included, powered from the gate board, works without internet.
Keys for family and guests
Opens by itself when you arrive
Shows whether the gate is closed
HomeKit / Google / Alexa
If you already have a smart home
Shelly / dry relay
A cheaper option for those who already have Home Assistant or the Tuya app.
The relay «presses» the same button — just from your phone
The Key Automation CT102 (230 V, 1 motor) board has a place where the button is connected. The relay connects right there and «presses» the button from the app the same way you do. Photocells and remotes stay — nothing is disconnected.
Where exactly the relay connects
Gate type
sliding
Board
CT102 (230 V, 1 motor)
Drives
TURBO 50, TURBO 80, TURBO 160 (230 V sliding), 230 V up-and-over doors; spare 900CT102B
Where it connects
(1) (2) ↓
Labels
named
Supply
230 V
·
Where exactly the relay connects
Two terminals on the board — (1) and (2) in the drawing: (1)(2). A short click = one command (open → stop → close). The installer checks the labels on your board.
Low-voltage terminal block at the bottom of the board: SS (step-by-step, «S B S» on the silkscreen) is the NO stepping command and COM is its common: open — stop — close — stop. OPEN, CLOSE and PED are separate NO inputs to the same COM. EDGE-EDGE, PH2, PH1 and STOP are NC safety inputs — never wire the relay there; unused ones are switched off with DIP 1-4. The left block (L N COM Vac CR FLASH) carries 230 V — electrician only.
·
Separate «open» and «close»
OPEN + COM opens only, CLOSE + COM closes only — two channels of a multi-channel relay; the third channel is a break contact in series with the STOP loop STOP-COM (keep DIP 4 STOP enabled). SS stays free; PED is not used for the relay.
·
More buttons in the app
If you want separate close, open, stop buttons — a multi-channel relay is used, each channel on its own block of the board.
Multi-channel relay → separate buttons in the app
·
How to power the relay — 24 V AC is not 24 V DC
⚡
Many boards (BFT 50/51, CAME 10/11, Nice) give 24 V AC on the accessory terminals. A Wi-Fi relay fed from AC dies at once — measure with a multimeter first, or read the manual.
Only use board power if the manual states DC and the current budget (Alutech: ~120 mA) covers the relay; otherwise an AC/DC adapter or a 230 V supply on the mains side (electrician).
Remootio 3 accepts 12–24 V AC/DC and USB — the safest option. Shelly Plus 1: DC 12–24 V or 230 V, never AC 24 V.
Never take relay power from the command terminals themselves.
FAQ
Do I need to replace the gate motor?
No. The Key Automation CT102 (230 V, 1 motor) stays, the relay connects where the button is. Remotes work as before.
Can I give a key to my parents or the nanny?
Yes — in the Remootio app you send a key for a specific time or permanently and revoke it at any moment.
What if there is no internet?
Remootio works locally over Bluetooth and Wi-Fi. The remote and the button always work.
Can I see whether the gate is closed?
Yes — the sensor on the gate shows the real position in the app and can send a notification if the gate was left open.
Can I connect it myself?
The relay part is low-voltage, but a gate is a machine: the 230 V side and the check are best left to an installer. We connect and test.
!
A gate is a heavy machine. Leave the 230 V side and start-up to an electrician or installer; the relay is connected only with the drive switched off. This page explains how it works — it does not teach you to do it yourself.
SmartBee · Smart home · Gate from your phone · Gate automation for family homes — simplyParts of this content may be AI-assisted. Terminal data comes from the official drive manual.