Nice ROBUS RBS (RBS400/RBS600/RBS600HS) gate — open it from your phone, remotes stay
No need to replace the drive or dig for the remote at the bottom of a bag. A small relay (Remootio) connects to the Nice ROBUS RBS (RBS400/RBS600/RBS600HS) board where the button already is — and the gate opens from the app, by voice, or by itself when you arrive.
★
Three reasons families choose this
No remotes. The phone is always with you; the remote stays in the car as a backup.
Guests without hassle. Send a key for an evening or a week — and revoke it when no longer needed.
Peace of mind. A notification if the gate is left open; a history of who opened and when.
☆
What the family gets
The relay sits next to the button, not instead of it. Button, remotes, photocells — all as before.
!
No voltage may reach these terminals ((1)(2)) — only a «dry» contact. That is why power relays are unsuitable and the connection is best left to an installer.
The gate opens from the app or by voice (Siri, Google, Alexa) — the relay clicks like a button.
The app shows whether the gate is open or closed — sensor included.
Keys for family, grandparents, guests and the courier — with time limits and revocation.
The gate opens by itself when you arrive (geofence) and closes on a schedule.
♥
What to get
Remootio 3 · (1)(2) → SbS + 24V (+)OXT T210G (Tuya) · (1)(2) → SbS + 24V (+)
For the family
Remootio 3
Made just for gates: sensor included, powered from the gate board, works without internet.
Keys for family and guests
Opens by itself when you arrive
Shows whether the gate is closed
HomeKit / Google / Alexa
If you already have a smart home
Shelly / dry relay
A cheaper option for those who already have Home Assistant or the Tuya app.
The relay «presses» the same button — just from your phone
The Nice ROBUS RBS (RBS400/RBS600/RBS600HS) board has a place where the button is connected. The relay connects right there and «presses» the button from the app the same way you do. Photocells and remotes stay — nothing is disconnected.
Where exactly the relay connects
Gate type
sliding
Board
ROBUS RBS (RBS400/RBS600/RBS600HS)
Drives
RBS400, RBS600, RBS600HS, RBS800
Where it connects
(1) (2) ↓
Labels
named (BlueBus)
Supply
24 V
·
Where exactly the relay connects
Two terminals on the board — (1) and (2) in the drawing: (1)(2). A short click = one command (open → stop → close). The installer checks the labels on your board.
Newer ROBUS RBS PCB (not the RBA3). Blocks: Flash|OGI · Photo|SbS|24V · GND|Stop|12V OSE · Bluebus · Aerial. Relay across SbS and the 24V (+) terminal right next to it (Fig.33: SBS NO contact between SbS and 24V). Stop (NC/NO/8k2/OSE, referenced to GND) and Photo (NC) are safety inputs — do not touch. 12V OSE is only for an optical safety edge.
·
Separate «open» and «close»
This board has one toggle button — like a remote. In the app it looks like one «gate» button.
·
How to power the relay — 24 V AC is not 24 V DC
⚡
Many boards (BFT 50/51, CAME 10/11, Nice) give 24 V AC on the accessory terminals. A Wi-Fi relay fed from AC dies at once — measure with a multimeter first, or read the manual.
Only use board power if the manual states DC and the current budget (Alutech: ~120 mA) covers the relay; otherwise an AC/DC adapter or a 230 V supply on the mains side (electrician).
Remootio 3 accepts 12–24 V AC/DC and USB — the safest option. Shelly Plus 1: DC 12–24 V or 230 V, never AC 24 V.
Never take relay power from the command terminals themselves.
FAQ
Do I need to replace the gate motor?
No. The Nice ROBUS RBS (RBS400/RBS600/RBS600HS) stays, the relay connects where the button is. Remotes work as before.
Can I give a key to my parents or the nanny?
Yes — in the Remootio app you send a key for a specific time or permanently and revoke it at any moment.
What if there is no internet?
Remootio works locally over Bluetooth and Wi-Fi. The remote and the button always work.
Can I see whether the gate is closed?
Yes — the sensor on the gate shows the real position in the app and can send a notification if the gate was left open.
Can I connect it myself?
The relay part is low-voltage, but a gate is a machine: the 230 V side and the check are best left to an installer. We connect and test.
!
A gate is a heavy machine. Leave the 230 V side and start-up to an electrician or installer; the relay is connected only with the drive switched off. This page explains how it works — it does not teach you to do it yourself.
§
About safety
§
When a gate is opened remotely, photocells and force limiting (EN 12453) matter even more — they must work. Factory safety is never disabled. Exact terminals for your board version — in the official Nice ROBUS RBS (RBS400/RBS600/RBS600HS) manual (Nice IDV0777A00EN §4.3.1 Fig. 33 / Table 5).
Want your Nice ROBUS RBS (RBS400/RBS600/RBS600HS) gate on your phone?
Remootio is in the catalogue with the sensor included. If you like, we connect it and show how to give keys to the family.
SmartBee · Smart home · Gate from your phone · Gate automation for family homes — simplyParts of this content may be AI-assisted. Terminal data comes from the official drive manual.