Buying guide

PC speakers: how to choose and position them on your desk

A desk that sounds good comes down to three things: the right speaker type for your use, the right connection and correct placement. Here are the steps, plus an honest word on when you do not need speakers at all.

Updated: 20 November 2026 · SmartBee
In short
  • For work and video, 2.0 is enough; a subwoofer (2.1) is for films, games and bass-heavy music.
  • Look at RMS power, not PMPO: at a desk, 60–100 cm from the speakers, a few watts RMS is enough.
  • A wired connection (USB or 3.5 mm) has no noticeable lag; Bluetooth is convenient, but its delay shows in games and video.
  • The speakers and your head should form an equilateral triangle: tweeters at ear height, speakers angled toward you and 10–20 cm from the wall.

Step 1. What the speakers are for

Choose by use case. Video and work need clear speech, games and films also need bass, and audio editing needs flat sound without flattery.

UseTypeWhat to check
Work, calls, videoCompact 2.0, activeSpeech clarity, USB or 3.5 mm, volume knob on the unit
Games and films2.1 with a subwoofer, or a soundbarBass, RMS power, a lag-free wired connection
Music2.0, multimedia or bookshelfNeutral sound, 3.5 mm or USB, cabinet size
Video and audio editingNear-field monitors, wiredFlat response rather than a pleasing sound

Studio near-field monitors sound flat, so mistakes in the edit are audible. Multimedia speakers are usually "flattering", with extra bass and sparkle: pleasant to listen to, but harder to make mixing decisions on.

An honest note: the SmartBee catalogue has only a few speakers made specifically for PCs. They are mostly gaming and multimedia models, for example ONIKUMA L2 Gaming Speakers, ONIKUMA L16 Gaming Speaker, ONIKUMA L6 Multimedia Gaming Speaker with BT5.0 and Logitech speaker system with subwoofer, Z313. For more choice, see home and portable audio.

Step 2. 2.0 or 2.1

2.0 means two speakers. 2.1 adds a subwoofer: it takes over the bass, so the two desktop speakers can be smaller. For films, games and electronic music the difference is clear.

  • Choose 2.0 if the desk is small, you listen to speech, podcasts and background music, and the neighbours behind the wall mind bass.
  • Choose 2.1 if you want a sense of scale in games and films and have space for the subwoofer under or beside the desk.
  • Do not put the subwoofer tight against a wall or in a corner: the bass turns boomy.
Tip: If the bass booms or there is too much of it, first turn down the level knob on the subwoofer itself and move it out of the corner. If there is too little, move it closer to a wall. Change the model only after that.

Step 3. Power and amplification

Look at RMS (continuous power), not PMPO or "peak" figures: every maker measures PMPO its own way, so those numbers cannot be compared. At a desk with the listener 60–100 cm away, a few watts RMS per speaker is enough; big speakers on a small desk just get in the way.

Active speakers have a built-in amplifier and connect straight to the computer. Passive speakers need a separate amplifier, which is an extra box on a desk. For a computer, choose active speakers unless you are building a hi-fi system.

Step 4. Connection and Bluetooth delay

  • 3.5 mm (analogue): simple and lag-free; quality depends on the computer's sound card, and sometimes you hear hum.
  • USB: the speakers have their own DAC, so there is no sound-card noise; it also works for a laptop with no headphone jack. On some compact models the USB cable only supplies power and the audio still runs over 3.5 mm: check the description.
  • Optical (S/PDIF): a digital signal, if your computer or sound card has the output.
  • Bluetooth: no cables, handy for a phone. But there is a delay: in games the sound lags behind the picture; video players often compensate for it, games cannot.

The rule is simple: use a wired link for the computer and games, and keep Bluetooth for the phone and background music. If the speakers have both Bluetooth and a wired input, connect the computer by cable. Bluetooth is stated, for example, in the name of the ONIKUMA L6 Multimedia Gaming Speaker with BT5.0.

Step 5. Placement, step by step

  1. Place the speakers and your seat in an equilateral triangle: the distance between the speakers is about the same as from each speaker to you.
  2. Raise the speakers so the tweeters sit at ear height: use stands or a stack of books.
  3. Angle them toward you rather than letting them fire straight ahead past your ears.
  4. Pull them 10–20 cm from the wall, especially if the bass port is at the back; otherwise the bass booms.
  5. Put the subwoofer on the floor under the desk, not in a corner or tight against a wall.
  6. Set a medium volume and test a voice: it should appear midway between the two speakers.
10–20 cm from the wallLeftRightListenerequal sides: 60–100 cmtweeters at ear height, turned towards the listener
The listener and two speakers form an equilateral triangle, with the speakers angled at the ears and tweeters at ear height.

Step 6. When headphones or a soundbar are better

Headphones are better if you share the room, play or edit at night, or the room is untreated: the sound does not disturb anyone and does not depend on the walls. Browse them under headphones.

A soundbar under the monitor saves space: one bar instead of two speakers. For a desk, compact models fit, such as Defender Z2 USB Soundbar Speaker or ONIKUMA L13 RGB computer soundbar with microphone. For films there are also TV soundbars such as the Ultimea Poseidon M20 Soundbar (U2202). These usually connect over HDMI ARC or optical, outputs a computer often lacks, so check the width and whether the bar has an input your computer can use before you buy. You will find more in the home audio catalogue.

If you want speakers built into the room rather than on the desk, read our guide to ceiling speakers.

Frequently asked questions

Which is better for a computer, 2.0 or 2.1?

For work, video and background music, 2.0 is enough. If you game, watch films and want bass, choose 2.1 with a subwoofer.

What should I check on speakers, RMS or PMPO?

RMS: it is the real continuous power. PMPO and "peak" power are heavily inflated and not useful for comparison.

Is Bluetooth fine for gaming?

For gaming a wired connection is better: Bluetooth adds delay, so the sound lags behind the picture. For music and background listening Bluetooth is fine.

How do I position speakers on a desk?

Place them so that the speakers and your head form an equilateral triangle: tweeters at ear height, speakers angled at you and 10–20 cm from the wall.

Why use studio monitors when multimedia speakers exist?

Near-field monitors sound flat and reveal recording mistakes. Multimedia speakers flatter the sound: nicer to listen to, less accurate for editing.

Soundbar or two speakers: which is better?

A soundbar takes less room and fits under a monitor. Two speakers give better stereo and more precise imaging if they are placed correctly.

Browse home and desk audio

The SmartBee catalogue has soundbars, Bluetooth speakers and smart speakers. Speakers made specifically for PCs are few, so check the connection and size.

Browse home audio

Read next

Loading...
Back to top